Displacement: 3,49 cc
R.P.M. (max power): 34.500 RPM
Practical range: 6.000-36.200 R.P.M.
Bore x stroke: 16,26x16,80 mm
Sleeve: 5 ports
Rear ball bearings: steel
Fronto ball bearings: steel
Crankshaft: 14,5 mm - turbo
Carburetor: aluminium - 9 mm - slide
Glowplug: Turbo (C6TGC)
Exhaust position: rear
Weight: 363 g
Fuel type: 25% nitro
The material of this piston is choosen for its excellent strength to weight properties. The shape of the top of the piston is our 'Compact Combustion Tecnology' which improves the efficiency of the engine. This piston is also milled from a single block which further increases the strength.
The sleeve has 5 transfer ports and an exhaust with booster ports. The special shape and positioning of the ports, covered by a patent, improve the internal fluid-dynamics to obtain the maximum possible performance.
The R7 conrod is made from a superlight alluminium which has been checked ultrasonic. The specific form of the R7 creates little turbulence inside the engine while running.
The combustion chamber is supported by an O-Ring which is placed between the combustion chamber and the crankcase to reduce the vibrations of the combustion chamber.
The glowplug of engine is a Turbo type glowplug. Turbo glowplugs have a different shape than Standard glowplugs and therefor are not interchange able with engines that are using Standard glowplugs.
This carburettor is made from plastic and have a sliding throttle valve (reverse type).